Categories

False alarms and system glitches can be exasperating, and even worse, could prevent your security system from working the way it should. Luckily, most problems, from false alarms to dead batteries, are easy to correct. Take a look at our recommendations for troubleshooting your home alarm system in Green Bay. We’ll help keep your family members safe and your system operating smoothly.

Test Your Home Security System In Green Bay

One of the most sensible ways to troubleshoot your property’s security is to test it! Newer systems allow you to place them in test mode to avoid triggering an emergency call. After switching to test mode, do the following:

• Arm your system as you typically would when you head out.
• Open a door or window that uses a contact sensor, or try to set off something else. Shut the window or door so it doesn’t trip the alarm when you switch the system back on.
• Allow the alarm to resonate for 60 seconds to ensure communications with the security company and to produce an entry in the alarm activity log.
• Proceed to test equipment as needed
• Review the alarm’s activity log to confirm proper function.

No need to worry, monitoring specialists can tell that your alarm system is being tested. Just make sure to turn test mode off when done. It’s wise to test once a month or anytime you make changes to your home’s phone or internet provider.

Evaluate The Placement And Condition Of Motion Detectors

Although an crucial part of your alarm system, motion detectors are well known for false alarms. Prevent them with a few straightforward troubleshooting steps.

• Do a visual check. Is there something that could shift within the sensor’s detection range, like drapery caught in a breeze?
• Is the sensor covered in dust? Grime, dirt, and cobwebs can cause poor performance. Ensure the face is clean.
• Does the motion detector have pet immunity you can activate? Some sensors can be configured to disregard pets weighing as much as 100 pounds.
• When was the battery replaced? A low battery might affect performance or cause false alarms.
• Is a heat source affecting the sensor? Excess heat from direct sun or a fireplace can trigger an alarm.

Keep Batteries On Hand And Look Out For Low Battery Notifications

One of the great things about the latest home security systems is that they’ll tell you when batteries are getting low. If your system uses a control panel or mobile app, you’ll usually find alerts there. Depending on your system, you could hear an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every so often. It’s best to keep batteries ready and create a replacement schedule. Some systems also include a backup battery for the main control panel. This backup helps keep your system functioning if you have a power outage and should recharge itself once the electricity is working again. If it doesn’t recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Green Bay 

As the leading name in home security, ADT creates systems that supply unsurpassed protection and functionality. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always get notifications when a sensor battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfectly suited to your Green Bay home. Dial (920) 309-5629 or complete our form today!