ADT® Authorized Dealer Serving Green Bay & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Green Bay Home

Residents must protect against various risks like fire, flooding, and burglary. But what about a risk that you aren’t able to smell or see? Carbon monoxide is different from other dangers as you may never be aware that it’s there. Despite that, using CO detectors can simply safeguard yourself and your household. Explore more about this hazardous gas and where to place carbon monoxide detectors in your Green Bay property.

What Is Carbon Monoxide?

Known as the silent killer as of a result of its absence of color, odor, or taste, carbon monoxide is a readily found gas produced by an incomplete combustion of fuels. Any appliance that uses fuels like a fireplace or furnace can produce carbon monoxide. Even though you typically won’t have problems, difficulties can arise when equipment is not frequently serviced or adequately vented. These mistakes could lead to a build-up of this potentially deadly gas in your residence. Generators and heaters of various types are the most frequent reasons for CO poisoning.

When exposed to low amounts of CO, you might notice dizziness, headaches, fatigue nausea, or vomiting. Continuous exposure to high concentrations may lead to cardiorespiratory failure, coma, and death.

Tips For Where To Place Green Bay Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, purchase one today. Ideally, you should have one on each floor, and that includes basements. Here are a few tips on where to place carbon monoxide detectors in Green Bay:

  • Place them on each floor, especially in areas where you have fuel-burning appliances, including furnaces, fireplaces, gas dryers, and water heaters.
  • You should always use one within 10 feet of bedroom areas. If you only have one carbon monoxide detector, this is the place for it.
  • Position them approximately 10 to 20 feet from potential CO sources.
  • Do not position them directly above or next to fuel-burning appliances, as a non-threatening amount of carbon monoxide could be released when they start and set off a false alarm.
  • Fasten them to walls about five feet above the floor so they will sample air where occupants are breathing it.
  • Avoid using them beside doors or windows and in dead-air zones.
  • Put one in rooms above garages.

Check your CO detectors routinely and maintain them according to manufacturer guidelines. You will typically need to switch them out every five to six years. You should also make sure any fuel-burning appliances are in in proper working condition and have proper ventilation.